EFP-4920R400 Submersible Pump – Dirty Water 150 m³/h
The EFP-4920R400 submersible pump removes wastewater with a maximum flow rate of 150 m³/h (2,500 L/min) and a solids capacity of 80 mm. Powered by a 400 V three-phase supply, it features a 45° adjustable discharge, a tubular frame, and a 20 m cable. Pumping from low water levels is possible by tilting the pump to 90°, without the need for additional accessories.
Performances
• Maximum flow rate: 150 m³/h (2,500 L/min)
• Power consumption: 2,9 kW (useful power: 2,3 kW)
• Power supply: three-phase 400 V – 50 Hz
Further information
| Weight | 49 kg |
|---|
A submersible pump for floods and dirty water
The EFP-4920R400 submersible pump is suitable for drainage and wastewater removal operations on construction sites and during floods. Its 80 mm solids capacity allows it to pump water containing large particles, within this particle size limit.
Its 400 V three-phase electric motor delivers a useful power P2 of 2,3 kW, for an input power P1 of 2,9 kW. The maximum flow rate reaches 2,500 L/min, or 150 m³/h, at a zero discharge head.
Adjustable discharge and low-level pumping
The 4-inch discharge outlet can be angled at 45° to adapt the outlet to the installation. The tubular frame protects the pump and facilitates handling. The entire unit weighs 49 kg.
The technical specifications indicate that low-level pumping can be performed by tilting the pump at a 90° angle, without any additional accessories. The 20 m power cable is equipped with pull-out protection and a 16 A CEE connector.
Engine protections
The encapsulated motor is designed without oil or silicone. The technical specifications indicate safe dry running and a maintenance-free design.
- Automatic rotation direction.
- Protection against overloads and undervoltages.
- Protection against phase failures.
- Monitoring of mechanical joints.
- Safety lock for automatic restart.
Technical characteristics
| Model | EFP-4920R400 |
|---|---|
| Maximum flow rate | 2,500 L/min, or 150 m³/h |
| Maximum discharge head | 14 m at zero flow |
| Passage of solids | 80 mm |
| Food | Three-phase 400 V – 50 Hz |
| Power consumption P1 | 2,9 kW |
| Useful power P2 | 2,3 kW |
| Rated current | 5,2 A |
| Rotation speed | 1 450 rev / min |
| Suction / discharge | 4 inches |
| suppression | Adjustable to 45° |
| Cable | H07 RN-F 4G1,5 – 20 m |
| Connector | CEE 16 A |
| On / Off switch | IP45K |
| Size | 50x36x58 cm |
| Weight | 49 kg |
Flow rate according to the discharge head
| Delivery height | Debit |
|---|---|
| 0 m | 2 L/min |
| 5 m | 1 L/min |
| 7 m | 1 L/min |
| 10 m | 700 L / min |
| 14 m | 0 L / min |
Values taken from the technical data sheet. The available flow rate in the installation also depends on the pressure losses of the pipes and fittings.
Documentation and quote
Download the EFP-4920R400 technical datasheet (PDF).
Contact Euromast for a quote or to check if this pump is suitable for your application.
A selection of pumps adapted to your specific needs
Large range of firefighting and flood fighting motor pumps. Pumps can be skid-mounted, portable, or trailer-mounted
Range of motor pumps resistant to sea water. Can be used for security services on ships and oil ports, commercial ports
Fire pumps are usually approved by a certification body and are powered by an electric or diesel engine or sometimes by a steam turbine.
Pumps used for lifting wastewater, evacuating loaded and muddy water, drying or irrigating.
Motor pumps used during flooding to collect or drain water
Motor pumps and a swimming pool to fight fires, as well as our range of cellar pumps intended for the evacuation of rainwater and clear water!
MORE INFORMATION ?
DO YOU NEED?