single stage vertical centrifugal pump max flow 1600m³/h

Domestic and industrial wastewater, raw sewage, viscous and corrosive liquids, liquids containing fibrous and solid substances.

Performances

Maximum flow rate: up to 1600m³/h
HMT: up to 95 m
Max pressure: 10 bar
Temperature: up to +95°C

Further information

reference :

EIP-PC-V

Categories: Network Pumps

Description of the single-stage vertical centrifugal pump: EIP-PC-V

Update your network system by integrating the vertical centrifugal pump:

Vertical centrifugal pump single stage, wide volute housing, end suction, with closed, semi-open or vortex type impeller, horizontal or vertical installation.
Discharge Nozzle (DN-mm): PC -VM 250-315 AB / DN 40 to DN 300 mm
18 sizes base covering a wide range of operational areas.
Only a joint mechanical is applied for a vertical type installation
Axial thrust is balanced by the rear ribs of the impeller.
Hourly rotation view from the drive end.
Landings always lubricated with grease.
pumping capacity ranging up to 1600 m³/h and a maximum lifting height of 95 meters, it demonstrates robust performance for transferring water over long distances and at considerable heights.
Seal Options. According to customer request, mechanical seals are available, with the pump shaft always in stainless steel.

The advantages of the vertical centrifugal pump: PC-V

Versatility of Application. This pump is designed to handle a variety of liquids, including domestic and industrial wastewater, raw sewage, viscous and corrosive liquids, as well as liquids containing fibrous and solid substances.
Compliance with standards. Discharge flanges comply with EN 1092-2 / PN 10 standards, ensuring compatibility with standard piping systems.
Ease of Installation. Extending the discharge line to the base plate makes pump installation easier.
Effective lubrication. Indeed, PC-V type bearings benefit from grease lubrication, with the pumping liquid ensuring lubrication of the lower and internal bearings. Cala reduces maintenance and guarantees an extended lifespan.
Quality Standards: Compliance with EN 1092-2 / PN 10 standards, ensuring compatibility with standard piping systems.
No Gasket Required: No need for a gasket simplifies the system and can reduce the risk of leaks.

In conclusion, this single-stage vertical centrifugal pump offers robust performance. Ease of maintenance and compliance with standards make it an optimal choice for your pumping needs.